Dongguan CNC machining must be implemented in accordance with this regulation.

Dongguan CNC machining must be implemented in accordance with this regulation.

Dongguan CNC machining implementation steps
1.1 All operators engaged in various types of Dongguan CNC machining must undergo safety technical training and pass the examination before they can work. 

1.2 Before Dongguan CNC machining operation
1.2.1 Strictly use protective equipment before work, tie up cuffs, no scarves or gloves, female workers should put their defenses in their hats. The operator must stand on the foot pedal.

1.2.2 All parts of the bolts, stroke limits, signals, safety protection (insurance) devices, mechanical transmission parts, electrical parts, and lubrication points should be strictly inspected, and they can be started only after they are determined to be reliable.

1.2.3 All kinds of machine tool lighting application safety voltage, voltage shall not be greater than 36 volts.

1.3 During machining operation
1.3.1 Workpieces, clamps, tools and workpieces must be clamped firmly. All types of machine tools should be idling at low speed after starting up, and then they can be officially operated after everything is normal.

1.3.2 Tools and other things are not allowed to be placed on the track surface of the machine tool or on the workbench. It is not allowed to remove iron filings by hand, and special tools should be used to clean it.

1.3.3 Observe the surrounding dynamics before starting the machine tool. After starting the machine tool, stand in a safe position to avoid the moving parts of the machine tool and the splashing of iron filings.

1.3.4 During the operation of various types of machine tools, it is not allowed to adjust the speed change mechanism or the stroke, and it is not allowed to touch the transmission part, the moving workpiece, the cutting tool and other working surfaces in the process, and it is not allowed to measure any size during the operation. The transmission part of the machine tool transfers or takes tools and other items.

1.3.5 Machining If abnormal noise is found, the machine should be stopped for maintenance immediately, and the machine must not be operated forcibly or with disease, and the machine tool is not allowed to be overloaded.

1.3.6 During the processing of each machine part, strictly implement the process discipline, read the drawings clearly, see the control points, roughness of each part and the technical requirements of the relevant parts, and determine the processing procedures of the parts.

1.3.7 Mechanical processing The machine must be stopped when adjusting the machine speed, stroke, clamping workpieces and tools, and wiping the machine. It is not allowed to leave the work post while the machine is running, and must stop and cut off the power supply when leaving for some reason.

1.4 After machining operation
1.4.1 The raw materials to be processed and finished products, semi-finished products and waste materials must be stacked in designated places, and various tools and knives must be kept intact and good.

1.4.2 After machining operations, you must cut off the power supply, remove the tool, put the handles in the neutral position, and lock the switch box.

1.4.3 The cleaning equipment is hygienic, the iron filings are cleaned, and the guide rails are filled with lubricating oil.

Author: Chris Na